Emission Estimation Technique Manual for Galvanizing Version 1.1
Environment Australia, 2001
ISBN 0 642 54701 7
Download the Manual
About this Manual
The purpose of all Emission Estimation Technique (EET) Manuals in this series is to assist Australian manufacturing, industrial, and service facilities to report emissions of listed substances to the National Pollutant Inventory (NPI). This Manual describes the procedures and recommended approaches for estimating emissions from facilities engaged in galvanizing activities.
The galvanizing activities covered in this Manual apply to facilities primarily engaged in the hot dip coating of a metallic workpiece with another metal to provide a protective film by immersion into a molten bath. Galvanizing (hot dip zinc) is the predominant form of hot dip coating in Australian industry.
EET MANUAL : Galvanizing
HANDBOOK : Metal Coating and Finishing
ANZSIC CODE : 2764
First published in July 1999
Version 1.1 - 8 February 2001
National Pollutant Inventory
Environment Australia
Emission Estimation Techniques Used in the Manuals
Estimates of emissions of NPI-listed substances to air, water and land should be reported for each substance that triggers a threshold. The reporting list and detailed information on thresholds are contained in the NPI Guide at the front of this Industry Handbook. In general, there are four types of emission estimation technique (EET) that may be used to estimate emissions from a facility.
The four types described in the NPI Guide are:
- sampling or direct measurement
- mass balance
- fuel analysis or other engineering calculations
- emission factors
Before you download
Most publications are downloadable as PDF files. Adobe Acrobat Reader is required to view PDF files.
If you are unable to access a publication, please contact us to organise a suitable alternative format.
Key
Links to an another web site
Opens a pop-up window